Categories

Advertising

AXIS AUTHORIZED PARTNER - HIKVISION AUTHORIZED DISTRIBUTOR ".....Menerima pemasangan dan Perbaikan CCTV... "

Controller for Vehicle Access

Cards owner vehicle plate number can be obtain quickly.
Give commands such as oppening and closing the gantry for special occasions suck as to facilitate the entry of a convoy of delivery vehicles quickly.

More details


Rp.0

Key Benefits:

 

  • Cards owner vehicle plate number can be obtain quickly.
  • Give commands such as oppening and closing the gantry for special occasions suck as to facilitate the entry of a convoy of delivery vehicles quickly.
  • Log vehicle staff according to Card ID, dates, entry date/time and exit date/time, etc.
  • Integration with various IP CCTV brands will seamlessly enhance your security with capture of image at the time of entry or exit. As such, able to do comparison at time of exit where image capture should be same person who drive the vehicle at entry.
  • With the feature of temporary card expire feature , it will automatically within a specific time so they cannot be reused later. This is ideal for Residential Community, club house, etc

Technical Specification


 

Microcontroller (MCU)                     : FREESCALE CF 32 bits @ 60mHz

Memory                                         : 512 kb EEPROM & 16 Mb FLASH

Battery Charger (12 VDC)               : 7AH (Onboard battery backup charger)

Operating Temperature                   : 0˚C to 60˚C

Humidity Range                              : 0-85% non-condensing

Card Holder                                   : 75,0000(upgradable to 150,000)

Event                                            : 40,0000(upgradable to 80,000)

Reader                                          : 1 IN + 1 OUT for 1x Falco IP Car Park Controller

:  2 IN + 2 OUT for 1x Falco IP Car Park Controller with expander

2 IN + 2 OUT for 1x Falco IP Car Park Controller with relay

: 12 VDC @ 200 mA per reader port

Reader Format                               : Standard Wiegand (26 bit to 64 bit)

Controlled Barrier                           : 1x Barrier In & 1x Barrier Out

Input Points On-board                     : 4 (Fire / Tamper / Door Contact / REX)

Security Encryption                         : AES-128

Holidays | Time Zones                     : 50 | 3

Time Sets | Time Sets Interval         : 50 | 3

Redundancy Control                        : TWO Destination (configurable) IP address

Software User Level                        : 3 (web 100)

Communication Type                       : RJ45 Ethernet | 10Base-T

Network Protocols                            : TCP/IP, ARP, DHCP,WEB

Minimum Power Requirement            :  IEEE 802.3af (PoE 15.4W of DC Power)

: IEEE 802.3at (PoE+ 30W of DC Power)

Board Dimension | Weight                : 137 (L) x 117 (W) x 15.5 (H) mm | 25g (w/o casing)

Certifications                                   : CE - Class A | UL 294 Listed

Security Mark                                  : FCC Part 15 | Class A ROHS

 

Feature


 

Advanced Design

The Falco controller uses the latest state-of-the-art flash memory technology which allows firmware upgrade. .Essential equipment settings, card database and transaction database are stored in EEPROM, so that there is no loss of data during power outage.

 

Multiple Entry Access Mode

There are 3 different entry access modes that you can set to adjust to your security requirements: Card only, PIN only and Card & PIN only. This means a door can be programmed to operate on different entry access mode at either same or different time for each day of the week, including weekends and holidays. For example, a door can be programmed to operate on 'Card only' entry mode during office hours but automatically switch to 'Card & PIN only' entry mode after office hours.

 

Use of Single Card to Perform Multiple Functions

The prowess of the Falco controller is its ability to allow a single card to perform multiple functions through software control. The types of functions consist of normal access control, programming, Arm/DisArm, guard tour, etc.

 

Schedules Settings

Up to 50 sets of weekly timers, where each daily timer consists of 3 sets of start and stop time interval settings can be used for system behavior control. These timers are also tagged to a day-of-week selection, which are used for all timers related operations, such as locking and unlocking of doors, activating of User PIN function, etc.

 

Power Supply

Falco Controller comes with battery charging and a power regulation circuit. The input power requirement is 14VAC, and a lead-acid battery can be connected to the charger output. In addition, AC power failure, low battery cut off and battery low status sensing are built-in.

 

-          Supports firmware  upgrade via IE

-          Compatible with various reader technologies

-          Interlocking

-          Built-in web server

-          Visitor Card Expiry

 

No customer comments for the moment.

Only registered users can post a new comment.

User Online

User Online: 2
Today Accessed: 341
Total Accessed: 83060
Your IP: 54.80.188.87

New products

No new products at this time

Specials

All specials